Hinges

Need to contact us?

Finest quality Stainless Steel Hinges, designed to create a contemporary finish, both inside and out.
Manufactured from Marine Grade 316 stainless steel, the product will thrive even in the toughest, high corrosive, coastal locations.
If you need any further product information email us on sales@blu-performance.com, or call the office on tel: 01726 871724.

Shimwell™ Packers

Product Ref: HQ

Shimwell™ Hinge Packers suitable for use with the HQ3 & HQ4 hinges, available in satin stainless steel. Traditionally, a piece of cardboard (or worse) is used to pack behind the hinge when installing an external door, or correcting a jamb that is out of alignment. However, materials such as cardboard compresses, causing the door to migrate, sag, and bind in the jamb.

Shimwells™ are always installed by the joiner when initially fitting the door, and make it easy to adjust the door when the door swells, and ends the inconvenience of having to plane the door down to release the bind. Simply loosen the hinge screws, and remove the 0.5mm, 1mm or 2mm Shimwells™ to bring the door back into alignment.

Each Shimwell™moves the hinge pin in between 0.5 – 2.0mm and can be used in pairs to create a larger shim to suit more severe gaps.

Please check the table below for the different thicknesses we offer in our Shimwell™ packer range.

Options:

Part Number Finish Design / Hinge Type Size (mm) Thickness (mm)
HQ-305-S-SSS SatinStainlessSteel Satin Stainless Steel Square Edge – HQ3 75 x 27 0.5
HQ-310-S-SSS SatinStainlessSteel Satin Stainless Steel Square Edge – HQ3 75 x 27 1.0
HQ-320-S-SSS SatinStainlessSteel Satin Stainless Steel Square Edge – HQ3 75 x 27 2.0
HQ-405-R-SSS SatinStainlessSteel Satin Stainless Steel Radius Edge – HQ4 / HQ4R 101 x 30 0.5
HQ-410-R-SSS SatinStainlessSteel Satin Stainless Steel Radius Edge – HQ4 / HQ4R 101 x 30 1.0
HQ-420-R-SSS SatinStainlessSteel Satin Stainless Steel Radius Edge – HQ4 / HQ4R 101 x 30 2.0
There are no available data cards for this product, these will follow shortly.
The HQ Shimwell™ Packers are designed to slide in behind either the HQ3 or HQ4 hinges, the hinges are then tightened to fix the packers into place.